AKEYO NITRO AO - HELP/SUPPORT PAGE

NITRO AO - The most easy to use animation overrider in SL.

add animations by simply throwing them onto the ao!
no complicated configuration notecards
loads animations in seconds
organize your animations via webinterface and create different AO and Dance Sets
hyper advanced cloud computing technology
fully featured dance HUD included

The NitroAO does automaticaly recognize ANY animation you put into !
No matter where they come from, who created it or what permissions they have.

NITRO AO - MANUAL

First Steps:

Buying the HUD at the AKEYO-STORE ⇲

- Teleport to the Akeyo-Store: AKEYO (111,111,111)

- Right-Click on one of the NITRO-AO-Vendors at the Landingpoint and select Pay.

- Click the button showing L$900 in the following Pop-Up.

- Confirm your payment by clicking the Pay-Button in the next Pop-Up.

- A blue Pop-Up will appear telling you:

"an object named Nitro Server owned by AKEYOsupport has given you this object: 'AKEYO_NITRO_AO_BOX'.

- Click Accept.

- You will find the Object: AKEYO_NITRO_AO_BOX under the Recent-tab in your Inventory.

De-Boxing ⇲

- Check your Inventory for the AKEYO_NITRO_AO_BOX in the Recent-tab

- Drag the Box out of your Inventory next to you on the Ground.

- Right-Click on it and select Open. A Window called Objects-Content appears.
Click on the Button Copy to Inventory and wait until all items arrive in your Inventory.

- A Notecard with a short Description about the Hud appears. You can read it and then close it.

- Right-Click again on the Box and select Take. Like this you can keep the Box in your Inventory as a Backup.

- A new Folder with the name AKEYO_NITRO_AO_BOX has been created in your Inventory.
Open it by clicking on the Arrow and check its Content.

Checking the Inventory and attaching the HUD ⇲

- Go to your Inventory and search for a Folder called: AKEYO_NITRO_AO_BOX

- Right-Click on AKEYO_NITRO_HUD and select Wear. on the upper left corner the minimized HUD appears
(press on + to maximize)

- When you attach the HUD for the 1st time you will notice that there are no animations detected.
There for you have to add some animations to you HUD.

Buying animations at the Akeyo-Store (with automatic installation) ⇲

- Teleport to the Akeyo-Store: AKEYO (111,111,111)

- Make sure that you are wearing the Nitro-AO.

- Go to the Animation-Overrider-Section. you will find female (left side) and male (right side) animation-vendors.

- Right-Click on of the Animation-Stands and select ||Animate. Your Avatar will automatically start playing the running   animation on the selected vendor.

- Change your Camera-Angle how it suits you best. If you dont know how to do that read this article.

- Click on the next or previous - buttons to change the current animation on the animation-vendor.
  (the red numbers on the left will change).

- If you found an Animation that you like right-click on the Vendor and select Pay. A Popup shows up.
  Click on the Button with the Price-Tag.

- A Blue Popup appears. Press Accept and the Animation will be added automatically to your HUD.
  To be save the Animation will also be stored in your Inventory.

- To get off the Animation-Stand you have to click on the Stand-Button on the bottom of your Screen.

Adding Animations at Home ⇲

- Detach your Hud by right-clicking on it and selecting Detach

- Go to your Inventory and find the AKEYO_NITRO_HUD. Drag it from the Inventory to the Floor next to you.

- Find the recently purchased Animation (of course you can add Animations of other Animation-Creators in SL)
  in your Inventory. Right Click on your HUD and select Edit.
  Go to the Content-Tab.

- Drag the Animation from the Inventory to the Content of your HUD. After a while the Animation will appear
  in the Content of your HUD.

Attach your Hud and press RELOAD

Configurate the HUD via Webinterface ⇲

- You probably have noticed that still there is not Animation triggered by the HUD.
  Its because you have to create A Set before you can use it.

- if the HUD is in Minimized-Mode click on the Maximize-Button and you will see the complete HUD.

- Depending in which Mode (MAIN, SETUP or DANCE) you have to click different buttons to go to the SETUP-Menu.

- In Main-Mode you just have to click the SETUP bottom and then the CONFIGURATION-Button.

- In Dance-Mode you just have to click the CONFIG-Button.

- In Setup-Mode you only have to click the CONFIGURATION-Button.

- After that a blue Window will appear asking you to open a Web-Page. Press Go To Page. Depending on your Settings
  a small SL-Browser-Window will open or your normal Browser outside of SL. I recommend to use a external Browser
  (Firefox, Chrome, Safari). To change it go to Preferences/Network & Files/Connection/Web browser.
  Select Use my Browser.

Creating Sets and adding Animations ⇲

- Make sure that you press RELOAD

- Your new Animation is shown on the left side in the YOUR ANIMATIONS-Section.

- If your Animation isn't by AKEYO you should check if it got automatically loaded in the right Category.
  Animations that are not recognized are flagged in RED.

- To change the Category select one of the those shown in the drop-down-menu on the right side of the Animation-Name.

- To create a new AO-SET go to the AO-SETS-Tab on the right and click on +CREATE NEW SET.
  A yellow Window will appear and you are able to type in a Name. Press OK.

- The newly created AO-SET will be shown right under DEFAULT (if not press RELOAD and check again)

- Click on your new AO-SET so it becomes high-lighted in yellow to make sure it is really selected.

- Go to your Animation on the left side and click on >>. The Animation will be added to your set and appear
  in the right half of the AO-SETS-Section (if not press RELOAD and check again).

- After every Configuration-Session make sure to press RELOAD on this page and in-world at your HUD.

Using Sets and Animations In-World ⇲

- Make sure to press RELOAD on your HUD

- Go to SETUP and check under ANIMATION-SET if the newly create Animation-Set appears. If not click on the right
  arrow until it shows up.

- To check if your Animations show up in the right Categories click on one of those and see if the Animation-Name
  If not click on the right arrow until it shows up.shows up above it (right under the PREVIEW-Button).

- Your Avatar starts to move if you selected the right Set with Animation included.

- If it still doesnt work, check if there are Animation loaded in your HUD and press RELOAD.
  Go back to the Webinterface and check the Content.

Dance Mode:

Creating Dance-Sets ⇲

- Make sure that you press RELOAD

- To create a new DANCE-SET go to the DANCE-SETS-Tab on the right and click on +CREATE NEW SET.
  A yellow Window will appear and you are able to type in a Name. Press OK.

- The newly created DANCE-SET will be shown right under DEFAULT (if not press RELOAD and check again)

- Click on your new DANCE-SET so it becomes high-lighted in yellow to make sure it is really selected.

- Go to your Animation on the left side and click on >>. Only Animations that are in the DANCE-Category
  (check dropdown) will be added to your set and appear in the right half of the DANCE-SETS-Section
  (if not press RELOAD and check again).

- After every Configuration-Session make sure to press RELOAD on this page and in-world at your HUD.

Using Dance-Sets and Animations In-World ⇲

- Make sure to press RELOAD on your HUD

- Go to DANCE and check under DANCE-SET if the newly create DANCE-Set appears. If not click on the right
arrow until it shows up.

- Your Avatar starts to dance if you have selected the right Set with Animation included.

- You can select different Dance-Animations by clicking the right or left arrow on both sides of the Animation-Name.

- If it still doesnt work, check if there are Animation loaded in your HUD and press RELOAD.
Go back to the Webinterface and check the Content.

Invite others to Dance ⇲

- To invite others to dance with you make sure you are in DANCE-Mode and click on INVITE.
  A blue Window appears where you can select different Friends around you

- Press one of the buttons associated with the Name of your Friend. After his Confirmation he starts to dance with you.

- You can select different Dance-Animations by clicking the right or left arrow on both sides of the Animation-Name
  (at the same time all AV's that are dancing with you will be synced).

- To remove someone from your Dance-Session click on KICK.

  A blue Window appears where you can select different Friends around you.

- Press one of the buttons associated with the Name of your the Person you want to remove.
  The Person will stop dancing with you.

The Select-Button ⇲

- Click SELECT when you are in Dance-Mode

- A blue Window appears where you are able to choose between all the Dance-Animations
that are currently in your selected Dance-Set.

- Click on the Button with the Number that is associated with the Animation you like to use.

Advanced Usage:

Groundsit, Sit, Typing, On/Off, Minimize/Maximize ⇲

- Make sure that you are in Main-Mode. De-Click SETUP or DANCE to do so.

SIT ON GROUND:

- To sit on the Ground click on GROUNDSIT

- If you want to stop sitting ot the ground De-Click GROUNDSIT and your Avatar will go back to normal.

SIT-AO:

- To enable the SIT-AO click on the SIT-AO-Button

- Choose a place where you want to sit by right-clicking on the Object and select "Sit here".

- To choose a different Animation go to SETUP and select SIT.

- You can select different SIT-Animations by clicking the right or left arrow on both sides of the Animation-Name

- If you want to stop sitting select STAND on the bottom of your screen and your avatar will stand up.

ON/OFF:

- To disable the HUD click on the Power-Button (should be green right now). Your Avatar stops being animated.

- If you want to enable the HUD again click again the Power-Button (should be red). Your Avatar starts to move.

TYPING:

- To enable TYPING click on the TYPING-Button

- When ever you start to type in the chat the SL-Standart-Animation will be replaced by the Animation you bought
and added to your hud.

- To disable Typing de-click the TYPING-Button

MINIMIZE/MAXIMIZE:

- To minimize the hud click on the --Button on the right side of the Power-Button. you won't see any menu
and button-items anymore.

- To maximize the hud click on the +-Button and the interface will show again.

Quickaccess ⇲

QUICK ACCESS is a mode that makes it possible to use any animation in a spontanious/immediate way.

QUICK ACCESS CONFIGURATION:

- Go to Setup and press Configuration

- In the Browser click the Quick Access-Tab on the right side of the Webinterface

- Below you will see 1 2 3 4. click on 1 so that it is highlighted in yellow

- Go to the left side of the webinterface and click on the >> - Button of the Animation that you want to quick access

- After clicking it will appear in the pre-selected slot on the right side of the Webinterface

- Repeat the above for 2, 3 and 4 as well

- Don't forget to press RELOAD before you switch to SL.

HOW TO USE QUICK ACCESS IN-WORLD:

- Press RELOAD on your NITRO-HUD

- To use the QUICK-ACCESS-Animations.. just click on 1, 2, 3 or 4

Setup Mode:

Preview Mode ⇲

- Go to Setup and click PREVIEW (gets green afterwards)

- To choose between the different Categories go to the lower part of the hud and select one of the following:
Stand, Walk, Run, Typing...

- You can select different Animations by clicking the right or left arrow on both sides of the Animation-Name.
This will also change the default-Animation in single-mode

- To get out of the preview-mode deselect PREVIEW. your AV will go back to the selected Stand-Animation.

Creating Sets and adding Animations ⇲

- Make sure that you press RELOAD

- Your new Animation is shown on the left side in the YOUR ANIMATIONS-Section.

- If your Animation isn't by AKEYO you should check if it got automatically loaded in the right Category.
  Animations that are not recognized are flagged in RED.

- To change the Category select one of the those shown in the drop-down-menu on the right side of the Animation-Name.

- To create a new AO-SET go to the AO-SETS-Tab on the right and click on +CREATE NEW SET.
  A yellow Window will appear and you are able to type in a Name. Press OK.

- The newly created AO-SET will be shown right under DEFAULT (if not press RELOAD and check again)

- Click on your new AO-SET so it becomes high-lighted in yellow to make sure it is really selected.

- Go to your Animation on the left side and click on >>. The Animation will be added to your set and appear
  in the right half of the AO-SETS-Section (if not press RELOAD and check again).

- After every Configuration-Session make sure to press RELOAD on this page and in-world at your HUD.

Switching Animations and setting Single, Random and Sequence In-World ⇲

- To Switch between Random, Single and Sequence to to Setup and select one of the Categories below.
Use the Buttons below the Animation-Name to change the mode. When clicked the Button-Frame turns Yellow

- SINGLE: only the Animation above will be played.

- RANDOM: all animation that are part of the created set for this category (Stand, Walk etc) will be played in random.

- SEQUENCE: all animation that are part of the created set for this category (Stand, Walk etc) will be played in order
(you can change the order in the Webinterface (described below).

Checking for not-recognized Animations ⇲

- If your new Animation is not showing up in the HUD its possible that it hasn't been added to our system.

- Do the following to add it:

- Depending in which Mode(MAIN, SETUP or DANCE) you have to click different buttons to go to the SETUP-Menu.

- In Main-Mode you just have to click the SETUP bottom and then the CONFIGURATION-Button.

- In Dance-Mode you just have to click the CONFIG-Button.

- In Setup-Mode you only have to click the CONFIGURATION-Button.

- After that a blue Window will appear asking you to open a Web-Page. Press Go To Page. Depending on your Settings
  a small SL-Browser-Window will open or your normal Browser outside of SL. I recommend to use a external Browser
  (Firefox, Chrome, Safari). To change it go to Preferences/Network & Files/Connection/Web browser.
  Select Use my Browser. - Go to the Webinterface and Make sure that you press RELOAD

- Your new Animation is shown on the left side in the YOUR ANIMATIONS-Section.

- If your Animation isn't by AKEYO you should check if it got automatically loaded in the right Category.
  Animations that are not recognized are flagged in RED.

- To change the Category select one of the those shown in the drop-down-menu on the right side of the Animation-Name.

- To create a new AO-SET go to the AO-SETS-Tab on the right and click on +CREATE NEW SET.
  A yellow Window will appear and you are able to type in a Name. Press OK.

- The newly created AO-SET will be shown right under DEFAULT (if not press RELOAD and check again)

- Click on your new AO-SET so it becomes high-lighted in yellow to make sure it is really selected.

- Go to your Animation on the left side and click on >>. The Animation will be added to your set and appear
  in the right half of the AO-SETS-Section (if not press RELOAD and check again).

- After every Configuration-Session make sure to press RELOAD on this page and in-world at your HUD.

Changing Time ⇲

- if you want to change the time of each animation being played go to the Webinterface

- on the left side find the animation and change the number on the right side of the dropdown-menu. a red box will appear.
press ok afterwards so the red box is gone

- press RELOAD in the Webinterface and in-world on your HUD.

Changing Order ⇲

- If you want to change the order of a particular category (like Stand, Run etc.) in a danceset go to the Webinterface

- Go to the AO-SETS-Tab and select your SET. select the right Category in the Drop-Down-Menu (Stand, Run etc.)

- Below you will see some down and up arrows. Use these to move a particular animation more up/down in your list

- press RELOAD in the Webinterface and in-world on your HUD.

support/bug report form:

if you have other questions or need support on the AKEYO POWER AO fill out this form: